Directed Electronics 1500X User's Guide download pdf (Page 11)

AngioDynamics, Inc. Model 1500X User’s Guide and Service Manual

160-103990 Rev 03 Page 9

Connections/Ports:

13. “FOOT PEDAL” Port. Port for connecting a pneumatic foot pedal (for activating

and deactivating RF energy delivery). The foot pedal functions like RF ON/OFF

switch. The foot pedal may also be used to start and stop the purge operation

when the RF Generator is used with an infusion pump.

14. “RETURN” Dispersive Electrode Port. Port for connecting the Dispersive

(Return) Electrode(s) from the patient to the RF Generator.

15. “DEVICE” Port. Port for connecting the Device to the RF Generator via the

Main Cable. The port is keyed to ensure proper connection.

16. “AUX” Port. The port is keyed (different from the Device port) to ensure proper

connection.

4.2 Rear Panel

Switches and Connections:

1. RS-232. Serial ports for connecting to external devices for data communication.

Any device connected to RS232 data ports must comply with the requirements of

IEC 60601-1.

Port A: Port for connecting to a personal computer for use with RITA



-Base

Data Collection Software.

Port B: Port for controlling a RITA



specific infusion pump for use with the RF

Generator.

Port C: Port not defined/for future use. Not for user operation.

2. Software Module Access. The main software for the operation of the generator

resides in a Software Module. The RF Generator comes with this software

module already installed. If replacement of the Software Module is required

(e.g., repair, upgrade, etc.), this Module can be accessed by removing the

Software Module Access cover. This should only be done by qualified, resident

bioengineers and technicians. Refer to Section 7.1.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 29 30

No comments

Directed Electronics 1500X User's Guide Page 11