Directed Electronics Nissan Installation Guide download pdf (Page 20)

2200

OOppeenn aa ddoooorr..

(The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected.)

KKeeyy..

Turn the ignition on. (The H1/9 YELLOW switched ignition input must be connected.)

SSeelleecctt tthhee rreecceeiivveerr cchhaannnneell..

Press and release the Valet®/Program switch the number of

times necessary to access the desired channel. Once you have selected a channel, press

and

HHOOLLDD

the Valet®/Program switch once more. The siren will chirp and the LED will blink

the number of times corresponding to the channel that has been accessed.

NNOOTTEE::

If adding a remote, a button must be taught to Channel 1 prior to programming other chan-

nels.

PPrreessss tthhee ttrraannssmmiitttteerr bbuuttttoonn..

While

HHOOLLDDIINNGG

the Valet®/Program switch, press the trans-

mitter button that you wish to assign to that channel. The unit will chirp indicating

successful programming. You cannot teach a transmitter button to the system more than once.

NNOOTTEE::

For Channel 7, press Button I (see Transmitter Configuration section of this guide) to

program the Auto-learn Standard Configuration on a three-button transmitter.

CCHHAANNNNEELL PPRREESSSS AANNDD RREELLEEAASSEE

NNUUMMBBEERR TTHHEE VVAALLEETT//PPRROOGGRRAAMM SSWWIITTCCHH TTOO PPRROOGGRRAAMM FFUUNNCCTTIIOONN

1 One Time Arm/Disarm/Panic

2 Two Times Channel 2

3 Three Times Channel 3

4 Four Times Arm Only

5 Five Times Disarm Only

6 Six Times Panic Only

7 Seven Times Auto-learn* for 3-button transmitters

8 Eight Times Delete all transmitters**

**NNOOTTEE::

The Auto-learn function cannot be used to program an optional four-button trans-

mitter; the channels must be taught to the transmitter individually. See Transmitter

Configuration section of this guide for a description of Auto-learn transmitter programming.

****NNOOTTEE::

If any button from a known transmitter is programmed to Channel 8, all transmit-

ters will be erased from memory and will revert to the default feature settings. (See Features

Menu section of this guide.) This is useful in cases where one of the customer's transmitters

is lost or stolen. Channel 8 will erase any lost or stolen transmitters from the system's

memory and can also be used to start from scratch if the transmitter buttons were pro-

grammed incorrectly.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 28 29

Comments to this Manuals

No comments

Directed Electronics Nissan Installation Guide Page 20

Comments to this Manuals

Related products and manuals for Motor vehicle electronics Directed Electronics Nissan