Directed Electronics 1500X Owner's Manual download pdf (Page 5)

REMOVING THE TOP COVER

Key

Lock

Top Cover

Insert key into lock.1.

Turn the key counterclockwise.2.

Slide the top cover away from the key while the key is still turned. 3.

The cover only needs to slide approximately 0.25” before it can

be lifted up and removed from the amplifier.

NOTE: When installing cover, line up the pins on the bottom side of

the cover with the holes in the top of the amplifier. Slide toward the

power connectors. When the top cover shuts, it automatically locks

and does not require the key to complete.

NOTE: The top cover plate is designed to be reversible however the

LED color orientation will also appear changed when the cover is

reversed (see Amplifier Visual Troubleshooting section).

CEA SPECIFICATIONS

HCCA25001

Power Output: 750 Watts RMS x 1 at 4 ohms and

< 1% THD+N

Signal to Noise Ratio: -60 dBA (reference 1 Watt

into 4 ohms)

Additional Power Output: 2500 Watts RMS x 1

at 1 ohm at 14.4 Supply<1% THD+N

HCCA50001

Power Output: 1500 Watts RMS x 1 at 4 ohms

and < 1% THD+N

Signal to Noise Ratio: -60 dBA (reference 1 Watt

into 4 ohms)

Additional Power Output: 5000 Watts RMS x 1

at 1 ohm at 14.4 Supply<1% THD+N

Figure 4

Figura 4

Abbildung 4

1 2 3 4 5 6 7 8 9 10 ... 43 44

No comments

Directed Electronics 1500X Owner's Manual Page 5