Directed Electronics 400 Operations Instructions

1N400A 3/01© 2001 Directed Electronics, Inc. Car★Com Model 400The Automate®Car★Com™Model 400 can be used in two different ways - either as a stand-

10N400A 3/01© 2001 Directed Electronics, Inc. TYPE F: ONE-WIRE SYSTEMThis system usually requires a negative pulse to unlock, and cutting the wire

11N400A 3/01© 2001 Directed Electronics, Inc. Single-Resistor TypeIf one resistor is used in the door lock switch/key cylinder, the wire will pulse

12N400A 3/01© 2001 Directed Electronics, Inc. Single-Resistor TypeIf one resistor is used in the door lock switch/key cylinder, the wire will pulse

2N400A 3/01© 2001 Directed Electronics, Inc. SUPER-BRIGHT STATUS LED, 2-PIN WHITE PLUGThe super bright LED operates at 2V DC. Make sure the LED wir

3N400A 3/01© 2001 Directed Electronics, Inc. H1/1 ORANGEThis wire provides a latched (-) output when the system locks the doors or the anti-carjack

4N400A 3/01© 2001 Directed Electronics, Inc. H1/3 WHITE/BLUE AUXILIARY OUTPUT AND H1/12 RED/WHITE AUXILIARY OUTPUTThe auxiliary outputs of the Car★

5N400A 3/01© 2001 Directed Electronics, Inc. H1/10 BROWNThis wire provides a 200 mA output to drive a low-current factory horn circuit. Connect it

6N400A 3/01© 2001 Directed Electronics, Inc. DOUBLE PULSE UNLOCK SINGLE PULSE UNLOCKDOUBLE PULSE UNLOCKTo access this internal jumper, open the sl

7N400A 3/01© 2001 Directed Electronics, Inc. If you cannot get to the switch, and you find a set of wires that pulse (+)12V alternately on lock and

8N400A 5/99© 2001 Directed Electronics, Inc. TYPE B: (-) PULSES FROM THE SWITCH TO THE FACTORY RELAYSThis system is common in many Toyota, Nissan, Ho

9N400A 3/01© 2001 Directed Electronics, Inc. TYPE D: AFTER-MARKET ACTUATORSIn order for this system to control one or more after-market actuators,