Directed Electronics 3100 Instruction Manual download pdf (Page 11)

Remote and System Operations

Passive Arming

Park and exit the vehicle, after the doors are closed the Passive arming

countdown begins. The led ﬂashes quickly and after 30 seconds the

system arms itself.

Anytime before the system arms you can re-enter the vehicle or

open the trunk to load or unload items and, after closing passive arm-

ing resumes.

To stay secure in case of accidental disarming the system, if a

door is not opened within 30 seconds the system re-arms itself.

Note: This is a programmable option.

Valet Mode

Valet mode can be entered and exited by performing the Remote Valet

command or manually using the vehicle key and the valet button. Valet

Mode defeats the alarm features while the convenience features still

operate normally.

Use the following steps to manually enter and exit Valet Mode:

1. Turn the ignition On and then Off

2. Immediately press and release the valet button once

3. The status LED turns On when entering and Off when exiting.

You can also enter or exit Valet Mode by using the remote:

1. Open any vehicle door.

2. Press

and then press AUX. Press again.

The LED system status indicator lights solid when you enter Valet Mode

and turns off when you exit Valet Mode.

1 2 ... 6 7 8 9 10 11 12 13 14

No comments

Directed Electronics 3100 Instruction Manual Page 11