Directed Electronics G38106 User Manual

PowerClass®COMPONENT SPEAKER SYSTEM

PC PASSIVE CROSSOVER (COVER REMOVED)SPECIFICATIONSModel PC 525S PC 650SNominal Impedance 4 ohms 4 ohmsPowerContinuous/Peak50/100 watts 60/120 wattsFre

WarrantyLIMITED TWO YEAR CONSUMER WARRANTY:Directed Electronics, Inc. promises to the original purchaser, to replace this product shouldit prove to be

INTRODUCTIONThank you for your purchase of this PowerClass®Component LoudspeakerSystem from PrecisionPower™. Our engineers have combined state of the

TOOLS OF THE TRADEListed below are tools you may wish to have on hand before startingyour installation. Having the proper tools will make the installa

REAR DECK MOUNTINGIn rear deck installations, check the operation of the trunksuspension springs or tension bars. These tension bars can movewhen open

Step 6: Using the plastic grille ring as a template, mark themounting holes with a pen.Step 7: Pre-drill mounting holes using a 1/8" drill bit.WA

5NOTE: To remove the trim ring from the tweeter housing:1. Rotate the trim ring a few degrees in a clockwise direction until you feel a detent.2. Remo

FLUSH MOUNTING INTO REMOVED PANELSStep 1: Determine the tweeter mounting location, then route thewires from the crossover to the tweeter location.Step

FLUSH MOUNTING INTO MOUNTED PANELSStep 1: Determine the tweeter mounting location, then route thewires from the crossover to the tweeter location.Step

Step 8: Screw the bolts in until the tweeter housing is firmlymounted to the panel. (Make sure the arrow at the rear ofthe tweeter housing is pointing