Directed Electronics 650 Specifications

PAR–6505 Band Paragraphic EQ

SPECIFICATIONSPRECISION POWER PAR-650Filter Parameters Sub 30-70HzMid-bass 125-250HzLow-mid 400-800HzHi-mid 1.5-5kHzHi 8-20kHzBoost/Cut 18dB/octave ma

WarrantyLIMITED TWO YEAR CONSUMER WARRANTY:Directed Electronics, Inc. promises to the original purchaser, to replace this product shouldit prove to be

INTRODUCTIONThank you for choosing PrecisionPower™audio equipment. At PrecisionPower™we proudly design and engineer the world’s finest audio products.

● Built-in remote output with turn-on delay for switching on amps.● 30V MOSFET switching power supply.● Gold-plated RCA input/output jacks.● Half-din

retract with each press.● IN and OUT Position - A knob is set to its in position when it is initiallyextended. To set a knob to its out position pull

crossover frequency for the dedicated subwoofer output between30–400 Hz at 12dB/octave.5. High-Pass Output Frequency Control● IN/FRONT OUT FREQUENCY -

5CONTROL PANELREAR PANEL FEATURESPower Connector1. Remote Turn On Output - This output is intended to be the remote turnon for the system amplifiers a

5. Power Fuse - This fuse protects the PAR 650 on-board electricalcomponents. Never replace this fuse with one of higher value or damageto the PAR 650

NOTE: If connecting more than one input source to the PAR-650, usethe Source 1 gain controls to match the input level of both sources.3. Set the filte

5. If the front and rear outputs have been set to high pass by setting theswitch on the rear panel to the high pass setting, adjust the frontcrossover